UNI-T UT60D Dokumentacja Pobierz pdf (Strona 21)

Measurement Operation (5)

l Connect the test leads to the proper terminals as

said above to avoid error display.

l The LCD will display

indicating open-circuit for

wrong connection.

l The unit of diode is Volt (V), displaying the positive-

connection voltage-drop value.

l When diode testing has been completed, disconnect

the connection between the testing leads and the

circuit under test.

Resistance Measurement (see figure 7)

(figure 7)

The resistance ranges are: 3.400k , 34.00k , 340.0k ,

3.400M and 34.00M . To measure resistance,

connect the Meter as follows:

1. Insert the red test lead into the HzV terminal and

the black test lead into the COM terminal.

2. Set the rotary switch to

, resistance

measurement ( ) is default or press BLUE button

to select measurement mode.

3. Connect the test leads across with the object being

measured.

The measured value shows on the display.

blackred

Model UT60D: OPERATING MANUAL

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 41 42

Brak uwag

UNI-T UT60D Dokumentacja Strona 21